1993 Chevrolet Tahoe Key Fob Battery Replacement Guide
Key fob grant easy access to your auto. If the keyless entry remote battery is dead or weak you not to be able close trunk or doors from distance. It's not complicated to replace the battery in your keyless entry remote with our guide. All you need is outlined in this article.
What type battery does 1993 Chevrolet Tahoe keyless entry remote required
Prior to disassembly key fob check all that you need: flat head screwdriver and CR2016 batteries.- 2xCR2016 batteries
- flat head screwdriver
Simple steps to change the battery in your car's keyless entry remote
A tiny coin cell battery installed inside the your keyless entry remote. Accurately try to pry apart your key with hands or flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.
Get new batteries and install it inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, check that all functions works by pressing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. Check your key fob case for gaps. If it is not tightly closed try to repeat last step.
Video of key opening
How To Replace A 1993 - 1996 Chevrolet Tahoe Key Fob Battery FCC ID ABO0103T | ABO0104T
Still not working? Buy new one