How to Replace the Battery in a 1993 Dodge Vision Key Fob
If your Dodge key fob is not unlock doors properly, the battery probably needs to be replaced. In this post, we are going to tell you how to disassembly your keyless entry remote and replace a weak battery DIY. If you choose to do it at home near Vision, use this instruction, but don't forget to check everything you need before you start.
What is the battery key fob usePrior to disassembly key fob be sure that you have all required tools and materials: 2 CR2016 batteries and flat head screwdriver.
- 2xCR2016 batteries
- flat head screwdriver
Step by step instruction
Inside of your remote key fob installed tiny coin battery. Delicately try to pry apart your key with hands or flat head screwdriver. Change two CR2016 batteries with flat head screwdriver.
Change old batteries with new one CR2016. Battery must be placed with the same polarity as was an old. Your key will not work if you mistakenly put battery wrong way.
Before assembling fob’s case, verify that all is functioning by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and assemble it in place by hands from top to bottom. If your fob shell tightly closed, we done. If not, repeat the last step.
Video of remote key fob opening
How To Replace Eagle Vision Key Fob Battery 1993
Still not working? Buy new one