1993 Eagle Summit Key Fob Battery Replacement Instructions

If your Eagle key fob is not working properly, the cell battery most likely must to be replaced. In this article, we described how to disassembly your key fob and change your Eagle key battery step by step.
What size battery does 1993 Eagle Summit remote key fob take
Replacing batteries in remote key fob require flat head screwdriver and 2 CR2016 batteries. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
A tiny coin cell battery installed in the your key fob. Accurately try to open your fob with hands or flat head screwdriver. Remove 2 CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, check that all functions works by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. Check your remote key fob body for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video guide
How To Replace Eagle Vision Key Fob Battery 1993
Still not working? Buy new one