How to Open Your 1993 GMC Sonoma Key Fob & Change Battery

If your Sonoma key fob isn't open doors correct, the cell battery most likely needs to be changed. In this post, we are going to tell you how to open GMC keyless entry remote and replace a dead or weak battery yourself. If you decide to do it at home near Sonoma, follow our instruction, but don't forget to check all you need.
What is the battery keyless entry remote require
Before you start to disassembly remote key fob be sure that you have all recommended tools and materials: CR2016 batteries and flat head screwdriver.- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
Inside of your keyless entry remote installed small button battery. Delicately try to open your fob with flat head screwdriver. Remove two CR2016 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2016. Battery must be placed with the same polarity as was an old. Your key will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob's case, make sure that all working fine by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your body two halves together and put it in place by hands from top to bottom. If your key body tightly closed, we done. If not, repeat the last step.
How to replace the battery video guide
How To Replace GMC Sonoma Key Fob Battery 1993 1994 1995 1996
Still not working? Buy new one