1993 Mercury Sable Key Fob Battery Replacement Instructions

1993 Mercury Sable Key Fob Battery Replacement Instructions

Keyless entry remote allow access to your auto. When the key battery is discharged you not to be able lock trunk or doors remotely. In this post, we outlined how to open your car key fob and change your Mercury key battery.

What is the battery remote key fob require

Before starting disassembly remote key fob make sure that you have all recommended tools and materials: 2 CR2016 batteries and flat head screwdriver.
  • 2xCR2016 batteries
  • flat head screwdriver

Step by step guide

Inside of your keyless entry remote installed tiny coin cell battery. Gently try to pry apart your remote key fob with pry tools. Remove two CR2016 batteries with flat head screwdriver.

Replace old batteries with new one CR2016. Battery must be installed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly place battery wrong way.

Before assembling keyless entry fob's case, check that all functions works by testing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.

How to replace the battery video instruction

How To Replace Mercury Sable Key Fob Battery 1993 1994 1995 1996 1997

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Mercury Sable require 2xCR2016 batteries. Price for CR2016 batteries are under $5 build upon the type, brand and size packaging you buy. Take your old battery to the store, with you to find a proper replacement.

Keyless entry remote in most of cases do not require to be reprogrammed after battery replace. If your keyless entry remote not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Replacing your key fob battery is simple to do in 1993 Mercury Sable. Most of car manufacturers think about clients and make a special hole for keyless entry remote open.

The cost to replace the battery in keyless entry remote is in range $50-600 depending on the make and the service station.

Remote key fob batteries in Mercury Sable should be replaced once in 3-4 years, but this will vary based on usage and quality. If your remote key fob decreased signal strength, you should replace batteries before it stop working and make problems for you.

These signs will warning you that it's possible time to replace battery in your 1993 Mercury Sable: multiple clicks to unlock or lock doors required, key fob buttons not working, signal strength reduced and low key battery indicator on dashboard.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: GQ43VT4T
  2. Models: 1993-1997 Mercury Sable