How to Replace the Battery in a 1993 Toyota Celica Key Fob
If your auto keyless entry remote is not open doors perfectly, the cell battery surely needs to be replaced. Below, we outlined how to open your car key fob and replace your Toyota key battery.
What size battery does 1993 Toyota Celica remote key fob requiredReplacing battery in remote key fob require flat head screwdriver, phillips head screwdriver and 1xCR2025 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2025 battery
- flat head screwdriver
- phillips head screwdriver
Simple steps to replace the battery in your car's key fob
Inside of your remote key fob installed small coin cell battery. Remove screw on the back of the remote key fob. Flip the key fob over and find for at least 1 screw holding in the plastic.
Gently try to disassemble your remote key fob with flat head screwdriver. Replace one CR2025 battery with flat head screwdriver.
Get new battery and install it in fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, check that everything working properly by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Accurately try to put the pieces in place by hands from top to bottom. Check your key shell for gaps. If it is not firmly closed try to repeat last step. Screw the back of the keyless entry remote.
Video of key fob disassembly
How To Replace Toyota Celica Key Fob Battery 1990 1991 1992 1993 1994
Still not working? Buy new one