How to Replace the Battery in a 1994 Acura Legend Key Fob

Key fob allow access to your car. When the remote key fob battery is dead or weak you not to be able close car remotely. In this article, we explained how to open your keyless entry remote and replace your Acura key battery.
What type battery does 1994 Acura Legend key fob take
Before going to disassembly keyless entry remote be sure that you have all recommended tools and materials: phillips head screwdriver, 2xCR1220 batteries and flat head screwdriver.- flat head screwdriver
- phillips head screwdriver
- 2xCR1220 batteries
Simple steps to change the battery in your Legend's key fob
Inside of your keyless entry remote installed tiny coin cell battery. Remove fasteners on the back of the keyless entry remote. Spin the remote key fob over and find for at least 1 fastener holding in the plastic.
Delicately try to pry apart your fob with hands or flat head screwdriver. Remove CR1220 batteries with flat head screwdriver.
Now it's time to install new batteries inside keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. If your keyless entry remote case firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the remote key fob.
How to replace the battery video guide
How To Replace Acura Legend Key Fob Battery 1991 1992 1993 1994 1995
Still not working? Buy new one