How to Replace the Battery in a 1994 Buick Riviera Key Fob
If your Buick keyless entry remote isn't unlock doors correct, the battery probably must to be replaced. It's not complicated to change the battery in your keyless entry remote with our step by step guide. All tools, that you need is explained in this post.
What size battery does 1994 Buick Riviera keyless entry remote takeBefore you start to open key fob check all that you need: two CR2016 batteries and flat head screwdriver.
- flat head screwdriver
- 2xCR2016 batteries
Step by step guide
Inside of your key fob installed tiny button battery. Gently try to open your fob with flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.
Get new batteries and install it in keyless entry fob's body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new batteries installed, verify key fob functionality by pressing buttons. If everything is functioning, assemble your fob’s body in reverse order.
At this point squeeze fob’s back cover together. Line your body pieces together and assemble it in place by hands from top to bottom. Check your key case for gaps. If it is not tightly closed try to repeat last step.
Video of keyless entry remote disassembly
How To Replace Buick Riviera Key Fob Battery 1994
Still not working? Buy new one