1994 Buick Skylark Key Fob Battery Replacement Instructions

If your Buick key isn't unlock doors correct, the battery most likely must to be changed. Below, you will benefit from knowing how to disassembly your car key fob and replace a discharged battery DIY. If you gonna solve to do it at home near Skylark, use this instruction, but first make sure you have all you need.
What is the battery keyless entry remote use
Before you start to open remote key fob check all that you need: CR2016 batteries and flat head screwdriver.- flat head screwdriver
- 2xCR2016 batteries
Simple steps to change the battery in your car's remote key fob
A coin battery installed in the your key fob. Accurately try to open your remote key fob with pry tools. Change two CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries in fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new batteries installed, verify keyless entry remote functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's shell in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it together by hands from top to bottom. Check your remote key fob shell for gaps. If it is not tightly closed try to repeat last step.
How to replace the battery video guide
How To Replace Buick Riviera Key Fob Battery 1994
Still not working? Buy new one