How to Replace the Battery in a 1994 Chevrolet Impala Key Fob
Keyless entry remote grant access to your Chevrolet. Once the key battery is discharged you lose your keyless entry fob's ability to control distance opportunities. In this post, we demonstrate how to disassembly your key fob and change a dead or weak battery DIY. If you decide to do it at home near Impala, use this guide, but first make sure you have all you need before you start.
What kind of battery keyless entry remote useBefore starting disassembly remote key fob be sure that you have all recommended tools and materials: flat head screwdriver and CR2016 batteries.
- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
A small button battery installed in the your remote key fob. Gently try to disassemble your key fob with hands or flat head screwdriver. Remove 2xCR2016 batteries with flat head screwdriver.
Change old batteries with new one CR2016. Battery must be installed with the same position as was an old. Your remote key fob will not work if you by mistake place battery wrong way.
Before assembling fob’s case, verify that everything is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to put the pieces in place by hands from top to bottom. If your key case firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1994 Chevrolet Impala Video
How To Replace Chevrolet Impala Key Fob Battery 1994 1995 1996