Replace Key Fob Batteries

How to Replace the Battery in a 1994 Mitsubishi Expo Key Fob

How to Replace the Battery in a 1994 Mitsubishi Expo Key Fob

Keyless entry remote allow access to your Expo. When the keyless entry remote battery is discharged you lose your fob’s ability to use distance opportunities. It's not difficult to change the battery in your key fob with our ultimate guide. All you need is described in this post.

What kind of battery keyless entry remote use

Changing battery in remote key fob require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step instruction

A tiny coin cell battery installed inside the your remote key fob. Carefully try to pry apart your key with pry tools. Change 1 CR2032 battery with flat head screwdriver.

Change old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.

Before assembling fob’s case, make sure that all is functioning by testing buttons on key fob.

At this point squeeze fob’s back cover together. Line your body pieces together and assemble it in place by hands from top to bottom. If your keyless entry remote body tightly closed, we done. If not, repeat the last step.

How to change the battery video instruction

Mid 90's to Mid 2000s Mitsubishi Factory Remote Transmitter Programming How To

Still not working? Buy new one

FAQ

Remote key fob of Mitsubishi Expo require 1xCR2032 batteries. Most CR2032 batteries are under $4 depending on the type, brand and size packaging you buy. Take your old battery to the store, to be sure.

Usually, after remote key fob battery replace, reprogramming not required. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can change battery in your 1994 Mitsubishi Expo remote key fob yourself. Most hard part is to open keyless entry fob's case. It's pretty simple with our step by step guide.

The cost to change the battery in remote key fob can run anywhere from $30 to as high as $500 depending on the make and the service station.

You should change batteries inside remote key fob of Mitsubishi Expo at least once in three or four years. lifespan of battery vary on their amount of use, quality and operating conditions. Lithium cells normally will last longer.

These symptoms will alert you that it's probably time to replace battery in your Mitsubishi Expo: you didn't change battery more than 4 years, signal strength reduced, key fob buttons not working and multiple clicks to unlock or lock doors required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Mitsubishi Models:

Fob Compatibility:

  1. FCC ID: E4EG8DA
  2. Models: 1993-1994 Mitsubishi Eclipse