How to Open Your 1995 Nissan Quest Key Fob and Change Battery
Key fob allow access to your car. Once the key battery is dead or weak you not to be able unlock trunk or doors remotely. In this case, we explained how to disassembly your car keyless entry remote and change a dead or weak battery DIY. If you decide to do it at home near Quest, follow our instruction, but don't forget to check everything you need before you start.
What kind of battery remote key fob requireReplacing battery in remote key fob require 1 CR2025 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- 1xCR2025 battery
- flat head screwdriver
Step by step guide
A tiny button battery installed inside the your keyless entry remote. Carefully try to disassemble your keyless entry remote with flat head screwdriver. Remove 1xCR2025 battery with flat head screwdriver.
Replace old battery with fresh one CR2025. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you place battery wrong way.
Before assembling keyless entry fob's case, make sure that all is functioning by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. Check your key shell for gaps. If it is not firmly closed try to repeat last step.
Video of remote key fob opening
How to program a Nissan Quest remote key fob 1996 - 2010