1996 Buick LeSabre Key Fob Battery Replacement Instructions
Keyless entry remote grant access to your auto. If the remote key fob battery is weak or dead you not to be able unlock trunk or doors from distance. In this post, we walks you through how to disassembly your key fob and replace your Buick key battery step by step.
What size battery does 1996 Buick LeSabre remote key fob take
Don't forget before open remote key fob be sure that you have all recommended tools and materials: 1xCR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
Inside of your keyless entry remote installed small coin battery. Carefully try to disassemble your fob with hands or flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, check key fob by pressing buttons. If everything working fine, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1996 Buick LeSabre Video
How To Replace Buick Lesabre Key Fob Battery 1996 1997 1998 1999
Still not working? Buy new one