Replace Key Fob Batteries

How to Replace the Battery in a 1996 Chrysler Concorde Key Fob

How to Replace the Battery in a 1996 Chrysler Concorde Key Fob

If your Chrysler remote key fob is no longer open doors perfectly, the battery surely needs to be changed. It's not complicated to replace the battery in your keyless entry remote, and it’s easier than you think. All you need is explained in this article.

What type battery does 1996 Chrysler Concorde keyless entry remote required

Before going to disassembly keyless entry remote check all that you need: two CR2016 batteries and flat head screwdriver.
  • 2xCR2016 batteries
  • flat head screwdriver

Simple steps to replace the battery in your car's keyless entry remote

Inside of your remote key fob installed tiny coin cell battery. Delicately try to disassemble your keyless entry remote with flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.

Replace old batteries with new one CR2016. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.

Before assembling fob’s case, verify that everything is functioning by pressing buttons on remote key fob.

At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. Inspect your fob shell for gaps. If it is not tightly closed try to repeat last step.

Video of key fob disassembly

How To Replace Chrysler Concord Key Fob Battery 1994 1995 1996

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Concorde use 2xCR2016 batteries. Price for CR2016 batteries are under $4 depending on the size packaging, brand and type you buy. You can take old battery to the store, with you to find a proper replacement.

Key fob in most of cases reprogramming not needed after battery change. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Replacing your keyless entry remote battery is easy to do in 1996 Chrysler Concorde. Most of car manufacturers think about clients and make a special hole for keyless entry remote open.

Auto repair shop's cost for change the battery in key is $50-600 depending on the make.

You should replace batteries inside remote key fob of Chrysler Concorde at least every 4 years. The lifetime of battery vary on usage time, quality and operating conditions.

These signs will alert you that it's possible time to change battery in your 1996 Chrysler Concorde: low key battery indicator on dashboard, you didn't change battery more than 4 years, multiple clicks to unlock or lock doors required and signal strength reduced.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: GQ43VT5T | GQ43VT7T
  2. Models: 1993-1997 Chrysler Concorde