1996 Chrysler LHS Key Fob Battery Replacement Instructions
If your car keyless entry remote isn't working properly, the battery most likely must to be replaced. In this post, we walks you through how to disassembly your car remote key fob and replace your Chrysler key battery step by step.
What is the battery keyless entry remote use
Before going to open key fob check all that you need: 2 CR2016 batteries and flat head screwdriver.- 2xCR2016 batteries
- flat head screwdriver
Simple steps to change the battery in your LHS's keyless entry remote
A tiny button battery installed inside the your remote key fob. Carefully try to pry apart your key with pry tools. Remove CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries in keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all functions works by testing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it together by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1996 Chrysler LHS Video
How To Replace Chrysler LHS Key Fob Battery 1994 1995 1996
Still not working? Buy new one