Replace Key Fob Batteries

1996 Chrysler Town & Country Key Fob Battery Replacement Instructions

1996 Chrysler Town & Country Key Fob Battery Replacement Instructions

If your car key is no longer open doors perfectly, the cell battery probably needs to be replaced. In this post, we explained how to open your car keyless entry remote and replace your Chrysler key battery.

What type battery does 1996 Chrysler Town & Country key fob take

Before starting disassembly keyless entry remote be sure that you have all recommended tools and materials: CR2016 batteries and flat head screwdriver.
  • flat head screwdriver
  • 2xCR2016 batteries

Step by step guide

A coin battery installed inside the your key fob. Delicately try to pry apart your fob with hands or flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.

Get new batteries and install it in keyless entry fob's shell. Battery must be placed with the same position as was a previous. Your keyless entry remote will not work if you by mistake put battery wrong way.

Before assembling fob’s case, check that all functions works by pressing buttons on keyless entry remote.

The last thing to do is put your cover back on fob. Accurately try to put the two halves in place by hands from top to bottom. If your fob body tightly closed, we done. If not, repeat the last step.

Key Fob Battery Replacement 1996 Chrysler Town & Country Video

How To Replace A 1996 - 1998 Chrysler Town & Country Key Fob Battery FCC ID GQ43VT7T

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Town & Country require 2xCR2016 batteries. Price for CR2016 batteries are under $4-6 build upon the size packaging, type and brand you buy. Take your old battery to the store, with you to find a proper replacement.

Keyless entry remote in most of cases reprogramming not needed after battery change. If your key fob not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Replacing your keyless entry remote battery is easy to do in 1996 Chrysler Town & Country. Most of car manufacturers think of the customers and make a special hole for remote key fob disassembly.

The cost to replace the battery in key can run anywhere $50-600 depending on the make and the service pricing.

You should change batteries inside remote key fob of modern cars at least every 3-4 years. The lifetime of battery differ on frequency of use, operating conditions and quality. Lithium cells usually will last longer.

These signs will alert you that it's probably time to change battery in your 1996 Chrysler Town & Country: signal strength reduced, low key battery indicator on dashboard, key fob buttons not working and multiple clicks to unlock or lock doors required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: GQ43VT9T
  2. Models: 1996-1998 Chrysler Town & Country