1996 Ford Crown Victoria Key Fob Battery Replacement Guide
If your car remote key fob is no longer unlock doors properly, the cell battery probably needs to be replaced. Below, we outlined how to disassembly your car remote key fob and change your Ford key battery.
What kind of battery key fob useDon't forget before disassembly remote key fob make sure that you have all recommended tools and materials: two CR1620 batteries and flat head screwdriver.
- flat head screwdriver
- 2xCR1620 batteries
Step by step guide
Inside of your key fob installed coin cell battery. Delicately try to disassemble your key with hands or flat head screwdriver. Replace two CR1620 batteries with flat head screwdriver.
Now it's time to install new batteries inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, check that everything working good by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your shell two halves together and put it in place by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step.
How to change the battery video guide
How To Replace Ford Crown Victoria Key Fob Battery 1995 2006
Still not working? Buy new one