How to Replace the Battery in a 1996 Oldsmobile Aurora Key Fob

If your Aurora keyless entry remote isn't open doors well, the battery probably needs to be replaced. It's not complicated to change the battery in your remote key fob DIY. All tools, that you need is explained below.
What size battery does 1996 Oldsmobile Aurora remote key fob required
Before going to disassembly keyless entry remote make sure that you have all recommended tools and materials: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Aurora's remote key fob
A small coin battery installed inside the your remote key fob. Carefully try to disassemble your fob with pry tools. Remove one CR2032 battery with flat head screwdriver.
Now it's time to install new battery in fob’s shell. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.
Before assembling fob’s case, make sure that all working good by pressing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your fob shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1996 Oldsmobile Aurora Video
How To Replace Oldsmobile Aurora Key Fob Battery 1996 1997
Still not working? Buy new one