1996 Toyota Supra Key Fob Battery Replacement Instructions
If your car keyless entry remote isn't unlock doors perfectly, the battery likely must to be replaced. Yes, it is possible to change the battery in your keyless entry remote by yourself. All tools, that you need is described below.
What size battery does 1996 Toyota Supra remote key fob required
Before starting open keyless entry remote make sure that you have all recommended tools and materials: phillips head screwdriver, 1 CR2025 battery and flat head screwdriver.- phillips head screwdriver
- flat head screwdriver
- 1xCR2025 battery
Step by step instruction
Inside of your remote key fob installed tiny button cell battery. Remove fasteners on the back of the keyless entry remote. Flip the key fob over and look for at least 1 screw holding in the plastic.
Gently try to disassemble your keyless entry remote with flat head screwdriver. Change one CR2025 battery with flat head screwdriver.
Replace old battery with fresh one CR2025. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, make sure that all functions works by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to put the pieces in place by hands from top to bottom. If your keyless entry remote body firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the keyless entry remote.
Video of key opening
How To Replace Toyota Supra Key Fob Battery 1995 1996 1997
Still not working? Buy new one