How to Replace the Battery in a 1997 Acura TL Key Fob

If your car remote key fob is no longer unlock doors properly, the battery surely needs to be changed. In this post, you’ll benefit from knowing how to open your car key fob and change a dead or weak battery yourself. If you decide to do it at home near TL, use this instruction, but don't forget to check all you need before you start.
What type battery does 1997 Acura TL keyless entry remote take
Before starting open keyless entry remote check all that you need: flat head screwdriver, 2 CR2016 batteries and phillips head screwdriver.- flat head screwdriver
- phillips head screwdriver
- 2xCR2016 batteries
Step by step instruction
Inside of your key fob installed tiny coin battery. Remove fasteners on the back of the keyless entry remote. Flip the keyless entry remote over and find for at least 1 fastener holding in the plastic.
Accurately try to pry apart your key with flat head screwdriver. Remove CR2016 batteries with flat head screwdriver.
Get new batteries and install it inside keyless entry fob's body. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you by mistake place battery wrong way.
Before assembling keyless entry fob's case, make sure that everything working properly by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Gently try to put the two halves together by hands from top to bottom. If your key fob body firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the keyless entry remote.
How to change the battery video guide
Acura TL Key Fob Battery Replacement (1996 - 2006)
Still not working? Buy new one