Replace Key Fob Batteries

How to Replace the Battery in a 1997 Dodge Vision Key Fob

How to Replace the Battery in a 1997 Dodge Vision Key Fob

If your car key is not working perfectly, the battery surely must to be changed. Yes, it is possible to change the battery in your key fob with our guide. All tools, that you need is outlined in this article.

What kind of battery keyless entry remote require

Before you start to disassembly remote key fob be sure that you have all recommended tools and materials: flat head screwdriver and 2 CR2016 batteries.
  • 2xCR2016 batteries
  • flat head screwdriver

Simple steps to change the battery in your Vision's keyless entry remote

A small button cell battery installed inside the your keyless entry remote. Gently try to pry apart your fob with pry tools. Remove 2xCR2016 batteries with flat head screwdriver.

Get new batteries and install it in keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

When the new batteries installed, check keyless entry remote by pressing buttons. If everything working good, assemble your keyless entry fob's body in reverse order.

At this point squeeze fob’s back cover together. Line your case pieces together and put it together by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.

How to replace the battery video instruction

How To Replace Eagle Vision Key Fob Battery 1994 - 1997

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Dodge Vision require 2xCR2016 batteries. Most CR2016 batteries are under $4-6 build upon the size packaging, brand and type you buy. You can take old battery to the store, with you to find a proper replacement.

Usually, after key battery replace, you do not need to reprogram. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can replace battery in your 1997 Dodge Vision key yourself. Most difficult part is to disassembly keyless entry fob's case. It's pretty simple with our instruction.

Car service pricing for replace the battery in key is $50-600 depending on the make.

You should replace batteries inside keyless entry remote of Dodge Vision at least every 4 years. The term of battery differ on their amount of use, operating conditions and quality. Famous brands cells usually will last longer.

If your Vision has low key battery indicator on dashboard, signal strength reduced, fob's battery more than 4 years old or need multiple clicks to unlock or lock doors, in most cases battery replace in key fob required. Currently installed battery is dead with a high probability, but if it's not help to fix issues, fob change or repair required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Dodge Models:

Fob Compatibility:

  1. FCC ID: GQ43VT5T | GQ43VT7T
  2. Models: 1993-1997 Dodge Vision