How to Open Your 1997 Mercury Villager Key Fob & Change Battery
If your car remote key fob is no longer unlock doors correct, the battery most likely needs to be changed. Below, we explained how to disassembly your car key fob and change a dead or weak battery DIY. If you decide to do it at home near Villager, use this guide, but first make sure you have tools and materials required.
What type battery remote key fob requireDon't forget before disassembly keyless entry remote make sure that you have all required tools and materials: one CR2025 battery and flat head screwdriver.
- 1xCR2025 battery
- flat head screwdriver
Simple steps to replace the battery in your car's key fob
A button cell battery installed inside the your remote key fob. Accurately try to open your key with hands or flat head screwdriver. Remove 1 CR2025 battery with flat head screwdriver.
Get new battery and install it in fob’s shell. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you place battery wrong way.
Before assembling fob’s case, verify that everything working properly by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your shell two halves together and put it together by hands from top to bottom. If your key case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1997 Mercury Villager Video
How To Replace Mercury Tracer Key Fob Battery 1997
Still not working? Buy new one