1997 Pontiac Trans Am Key Fob Battery Replacement Instructions
If your Trans Am key isn't working perfectly, the cell battery most likely must to be replaced. Yes, it is possible to replace the battery in your key fob, and it’s easier than you think. All tools, that you need is described below.
What is the battery key fob use
Replacing battery in key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's key fob
A small coin cell battery installed in the your remote key fob. Gently try to open your remote key fob with hands or flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
When the new battery installed, check remote key fob by pressing buttons. If everything is functioning, assemble your keyless entry fob's case in reverse order.
The last thing to do is put your cover back on fob. Accurately try to put the two halves together by hands from top to bottom. Check your key body for gaps. If it is not firmly closed try to repeat last step.
Key Fob Battery Replacement 1997 Pontiac Trans Am Video
How To Replace Pontiac Trans Sport Key Fob Battery 1997 1998
Still not working? Buy new one