How to Replace the Battery in a 1998 Chevrolet Blazer Key Fob
If your Blazer key fob is no longer open doors perfectly, the battery surely must to be replaced. In this article, you’ll benefit from knowing how to disassembly Chevrolet remote key fob and replace a weak battery DIY. If you gonna solve to do it at home near Blazer, use this guide, but first make sure you have tools and materials required.
What type battery key fob requireBefore starting open keyless entry remote check all that you need: one CR2032 battery and flat head screwdriver.
- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's keyless entry remote
A tiny coin battery installed in the your key fob. Accurately try to disassemble your keyless entry remote with pry tools. Replace CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check keyless entry remote by pressing buttons. If everything is functioning, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Carefully try to assemble the pieces together by hands from top to bottom. Check your key fob shell for gaps. If it is not firmly closed try to repeat last step.
Video of remote key fob opening
How To Replace Chevrolet Blazer Key Fob Battery 1998 1999 2000 2001