1998 Chrysler Town & Country Key Fob Battery Replacement Guide
Keyless entry remote grant easy access to your Town & Country. Once the key fob battery is weak you lose your fob’s ability to use remote opening function. It's not difficult to change the battery in your keyless entry remote with our instruction. All tools, that you need is described below.
What is the battery remote key fob use
Replacing batteries in remote key fob require flat head screwdriver and two CR2016 batteries. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 2xCR2016 batteries
Simple steps to replace the battery in your Town & Country's remote key fob
A small coin battery installed inside the your keyless entry remote. Carefully try to open your remote key fob with pry tools. Remove 2xCR2016 batteries with flat head screwdriver.
Now it's time to install new batteries in keyless entry fob's shell. Battery must be placed with the same position as was an old. Your key fob will not work if you by mistake put battery wrong way.
After the new batteries installed, check remote key fob functionality by pressing buttons. If all functions works, assemble your fob’s case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and assemble it together by hands from top to bottom. Inspect your key shell for gaps. If it is not tightly closed try to repeat last step.
Video of key fob disassembly
How To Replace A 1996 - 1998 Chrysler Town & Country Key Fob Battery FCC ID GQ43VT7T
Still not working? Buy new one