1998 Chrysler Voyager Key Fob Battery Replacement Guide

1998 Chrysler Voyager Key Fob Battery Replacement Guide

Key fob allow access to your Voyager. Once the key battery is weak you will lose your fob’s ability to control remote opening function. In this post, we outlined how to open your car remote key fob and replace your Chrysler key battery.

What type battery key fob require

Prior to open key fob be sure that you have all recommended tools and materials: two CR2016 batteries and flat head screwdriver.
  • 2xCR2016 batteries
  • flat head screwdriver

Simple steps to replace the battery in your car's key fob

A tiny button battery installed in the your key fob. Carefully try to pry apart your fob with flat head screwdriver. Remove CR2016 batteries with flat head screwdriver.

Replace old batteries with new one CR2016. Battery must be installed with the same polarity as was a previous. Your key fob will not work if you by mistake put battery wrong way.

When the new batteries installed, check keyless entry remote functionality by pressing buttons. If everything working properly, assemble your fob’s shell in reverse order.

At this point squeeze fob’s back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key fob case firmly closed, we done. If not, repeat the last step.

Video of key disassembly

How To Replace Plymouth Grand Voyager Key Fob Battery 1996 1997 1998

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Chrysler Voyager use 2xCR2016 batteries. Most CR2016 batteries are under $6 depending on the brand, type and size packaging you buy. Take your old battery to the store, to find a proper replacement.

Usually, after keyless entry remote battery replace, reprogramming not required. Key fob reprogramming procedure often described in user's manual of your vehicle.

Changing your key fob battery is simple to do in 1998 Chrysler Voyager. Most of car manufacturers think about clients and make a special hole for keyless entry remote disassembly.

The price to replace the battery inside keyless entry remote can run anywhere from $30 to as high as $500 depending on the brand and the service pricing.

You should change batteries inside keyless entry remote of Chrysler Voyager at least once in 4 years. lifespan of battery vary on usage time, quality and operating conditions. Lithium cells normally will last longer.

These signs will alert you that it's perhaps time to replace battery in your 1998 Chrysler Voyager: key fob buttons not working, multiple clicks to unlock or lock doors required, low key battery indicator on dashboard and you didn't change battery more than 4 years.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: GQ43VT7T
  2. Models: 1996-1998 Plymouth Voyager