How to Open Your 1998 Isuzu Trooper Key Fob & Change Battery
Keyless entry remote grant access to your auto. If the key battery is discharged you’ll lose your fob’s ability to control distance opening function. It's not difficult to change the battery in your key fob with our ultimate guide. All tools, that you need is explained in this post.
What size battery does 1998 Isuzu Trooper key fob takeBefore starting disassembly key fob be sure that you have all recommended tools and materials: 2xCR2016 batteries, flat head screwdriver and phillips head screwdriver.
- flat head screwdriver
- phillips head screwdriver
- 2xCR2016 batteries
Simple steps to change the battery in your Trooper's key fob
Inside of your keyless entry remote installed small coin battery. Unscrew the back of the keyless entry remote. Spin the keyless entry remote over and look for at least one fastener holding in the plastic.
Delicately try to disassemble your key fob with pry tools. Change two CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries inside fob’s body. Battery must be installed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, make sure that all is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Gently try to put the pieces in place by hands from top to bottom. If your fob shell firmly closed, we done. If not, repeat the last step. Screw the back of the remote key fob.
How to change the battery video guide
How To Replace A 1998 - 2002 Isuzu Trooper Key Fob Battery
Still not working? Buy new one