How to Replace the Battery in a 1998 Jaguar XJR Key Fob

If your auto remote key fob isn't working perfectly, the battery likely needs to be replaced. In this article, you will benefit from knowing how to disassembly Jaguar key fob and replace a dead battery yourself. If you decide to do it at home near XJR, use this instruction, but don't forget to check tools and materials required.
What is the battery remote key fob require
Replacing batteries in keyless entry remote require flat head screwdriver and CR2016 batteries. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 2xCR2016 batteries
Step by step guide
A button cell battery installed inside the your key fob. Accurately try to open your remote key fob with flat head screwdriver. Replace 2 CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries in keyless entry fob's shell. Battery must be installed with the same polarity as was an old. Your key fob will not work if you mistakenly put battery wrong way.
Before assembling keyless entry fob's case, make sure that everything is functioning by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 1998 Jaguar XJR Video
Jaguar XJ XJ8 XJR Key Fob Battery Replacement - DIY
Still not working? Buy new one