How to Replace the Battery in a 1998 Plymouth Breeze Key Fob

Keyless entry remote allow access to your auto. When the keyless entry remote battery is weak you will lose your keyless entry fob's ability to control remote opening function. It's not complicated to change the battery in your key fob, and it’s easier than you think. All tools, that you need is explained in this post.
What type battery key fob use
Before you start to disassembly keyless entry remote check all that you need: 2 CR2016 batteries and flat head screwdriver.- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
Inside of your keyless entry remote installed tiny button battery. Carefully try to disassemble your remote key fob with pry tools. Replace 2xCR2016 batteries with flat head screwdriver.
Now it's time to install new batteries inside fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new batteries installed, verify keyless entry remote functionality by pressing buttons. If all functions works, assemble your keyless entry fob's case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your fob body tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How To Replace Plymouth Breeze Key Fob Battery 1998 1999 2000