How to Replace the Battery in a 1998 Plymouth Neon Key Fob
If your Plymouth keyless entry remote is not unlock doors correct, the battery more likely must to be changed. Below, we demonstrate how to disassembly Plymouth key fob and change a discharged battery DIY. If you decide to do it at home near Neon, use this guide, but don't forget to check all you need.
What type battery remote key fob useBefore you start to open key fob check all that you need: 2 CR2016 batteries and flat head screwdriver.
- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
Inside of your keyless entry remote installed tiny button cell battery. Carefully try to open your key fob with pry tools. Replace CR2016 batteries with flat head screwdriver.
Get new batteries and install it in fob’s case. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.
Before assembling keyless entry fob's case, make sure that all functions works by testing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it in place by hands from top to bottom. If your key fob body tightly closed, we done. If not, repeat the last step.
Video of remote key fob disassembly
How To Replace Dodge Neon Key Fob Battery 1998 1999
Still not working? Buy new one