How to Open Your 1998 Volvo V70 Key Fob & Change Battery
If your car keyless entry remote is not unlock doors perfectly, the cell battery probably must to be replaced. In this article, we outlined how to disassembly your car key fob and replace your Volvo key battery.
What type battery does 1998 Volvo V70 keyless entry remote requiredPrior to disassembly key fob check all that you need: flat head screwdriver and 1xCR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A small coin battery installed inside the your keyless entry remote. Delicately try to open your remote key fob with pry tools. Replace 1 CR2032 battery with flat head screwdriver.
Get new battery and install it inside keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that all functions works by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your case pieces together and put it in place by hands from top to bottom. Inspect your key fob shell for gaps. If it is not tightly closed try to repeat last step.
How to replace the battery video instruction
How To Replace Volvo V70 Key Fob Battery 1998 1999 2000