How to Replace the Battery in a 1999 Chevrolet Lumina Key Fob
If your Lumina key is not working well, the battery likely must to be replaced. In this post, we demonstrate how to disassembly your car keyless entry remote and change a dead battery DIY. If you choose to do it at home near Lumina, use this instruction, but don't forget to check all you need.
What kind of battery remote key fob use
Before beginning disassembly keyless entry remote be sure that you have all required tools and materials: flat head screwdriver and 1 CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your Lumina's key fob
Inside of your keyless entry remote installed coin battery. Gently try to disassemble your key with pry tools. Remove 1xCR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.
Before assembling fob’s case, make sure that all functions works by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. Inspect your key case for gaps. If it is not firmly closed try to repeat last step.
How to change the battery video guide
How To Replace Chevrolet Lumina Key Fob Battery 1997 1998 1999
Still not working? Buy new one