1999 Ford Windstar Key Fob Battery Replacement Instructions

If your Windstar key fob isn't unlock doors perfectly, the battery probably must to be changed. In this article, you’ll benefit from knowing how to disassembly your remote key fob and change a weak battery DIY. If you decide to do it at home near Windstar, follow our guide, but don't forget to check all you need.
What size battery does 1999 Ford Windstar key fob required
Prior to open keyless entry remote check all that you need: flat head screwdriver and CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your Windstar's keyless entry remote
Inside of your remote key fob installed tiny button cell battery. Accurately try to open your key with flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Battery must be placed with the same position as was an old. Your key fob will not work if you mistakenly place battery wrong way.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything working fine, assemble your keyless entry fob's case in reverse order.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. Check your keyless entry remote shell for gaps. If it is not firmly closed try to repeat last step.
Key Fob Battery Replacement 1999 Ford Windstar Video
How To Replace A 1998 - 2003 Ford Windstar Key Fob Battery
Still not working? Buy new one