1999 Honda CR-V Key Fob Battery Replacement Instructions
Remote key fob allow easy access to your car. When the key battery is discharged you not to be able close car from distance. It's not difficult to change the battery in your key fob DIY. Everything you need is outlined in this article.
What is the battery remote key fob require
Prior to disassembly keyless entry remote make sure that you have all required tools and materials: 1 CR2025 battery, phillips head screwdriver and flat head screwdriver.- phillips head screwdriver
- flat head screwdriver
- 1xCR2025 battery
Step by step guide
Inside of your key fob installed small coin cell battery. Unscrew the back of the remote key fob. Flip the remote key fob over and look for at least 1 fastener holding in the plastic.
Gently try to disassemble your key with pry tools. Change 1 CR2025 battery with flat head screwdriver.
Replace old battery with new one CR2025. Battery must be installed with the same polarity as was a previous. Your key fob will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, make sure that all is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Accurately try to assemble the two halves together by hands from top to bottom. If your keyless entry remote case firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the remote key fob.
Video of key fob opening
How To Replace Honda CR V Key Fob Battery 1997 1998 1999 2000 2001
Still not working? Buy new one