1999 Jeep Cherokee Key Fob Battery Replacement Guide
Remote key fob grant access to your auto. If the remote key fob battery is weak you’ll not to be able unlock doors remotely. In this case, you will benefit from knowing how to disassembly your key fob and change a dead battery DIY. If you gonna solve to do it at home near Cherokee, use this instruction, but don't forget to check tools and materials required.
What is the battery key fob useBefore going to disassembly key fob be sure that you have all required tools and materials: 2 CR2016 batteries and flat head screwdriver.
- flat head screwdriver
- 2xCR2016 batteries
Step by step instruction
A button cell battery installed in the your keyless entry remote. Carefully try to pry apart your key fob with pry tools. Remove 2 CR2016 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that all functions works by testing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. If your remote key fob shell firmly closed, we done. If not, repeat the last step.
Video of key fob disassembly
Jeep Grand Cherokee Key Fob Battery Replacement (1999 - 2004)