2000 Chevrolet S10 Key Fob Battery Replacement Guide
If your auto key fob isn't open doors correct, the cell battery more likely must to be replaced. It's not difficult to change the battery in your keyless entry remote, and it’s easier than you think. All tools, that you need is outlined in this post.
What size battery does 2000 Chevrolet S10 keyless entry remote required
Don't forget before disassembly key fob check all that you need: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your car's key fob
A coin battery installed inside the your key fob. Carefully try to open your remote key fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, check that everything working good by testing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. Inspect your fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2000 Chevrolet S10 Video
How To Replace Chevrolet S 10 Key Fob Battery 1999 2000
Still not working? Buy new one