2000 Chrysler Sebring Key Fob Battery Replacement Guide

2000 Chrysler Sebring Key Fob Battery Replacement Guide

Key fob grant easy access to your car. If the key fob battery is dead or weak you lose your keyless entry fob's ability to use distance functions. In this post, we explained how to open your car keyless entry remote and replace your Chrysler key battery.

What size battery does 2000 Chrysler Sebring key fob required

Replacing batteries in remote key fob require flat head screwdriver and 2 CR2016 batteries. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • 2xCR2016 batteries
  • flat head screwdriver

Step by step guide

Inside of your key fob installed coin cell battery. Accurately try to disassemble your key with pry tools. Replace 2xCR2016 batteries with flat head screwdriver.

Now it's time to install new batteries inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.

Before assembling keyless entry fob's case, check that all working properly by pressing buttons on key fob.

The last thing to do is put your cover back on fob. Delicately try to put the two halves in place by hands from top to bottom. If your key fob shell tightly closed, we done. If not, repeat the last step.

How to change the battery video guide

How To Replace Chrysler Sebring Key Fob Battery 2000

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Chrysler Sebring require 2xCR2016 batteries. Most CR2016 batteries are under $4 depending on the size packaging, brand and type you buy. You can take old battery to the store, to find a proper replacement.

Usually, after remote key fob battery replace, reprogramming not required. Don't be scare of this procedure, because often it's described in user's manual.

Yes, you can replace battery in your 2000 Chrysler Sebring key yourself. Most difficult part is to disassembly fob’s case. It's pretty easy with our step by step guide.

The cost to change the battery inside keyless entry remote can run anywhere $50-600 depending on the make and the service pricing.

Key fob batteries in Chrysler Sebring should be changed every 3-4 years, also this will differ based on their amount of use and battery quality. If your key fob decreased signal strength, you should change batteries before it stop working and make trouble for you.

These symptoms will warn you that it's possible time to replace battery in your 2000 Chrysler Sebring: signal strength reduced, you didn't change battery more than 4 years, low key battery indicator on dashboard and multiple clicks to unlock or lock doors required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: GQ43VT6T
  2. Models: 1995-2000 Chrysler Sebring