How to Open Your 2000 Ford Excursion Key Fob and Change Battery

If your car keyless entry remote isn't open doors correct, the battery most likely must to be replaced. In this article, you’ll benefit from knowing how to disassembly Ford keyless entry remote and change a discharged battery DIY. If you decide to do it at home near Excursion, follow our guide, but first make sure you have all you need.
What type battery does 2000 Ford Excursion remote key fob take
Before going to open remote key fob make sure that you have all required tools and materials: one CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Excursion's key fob
Inside of your key fob installed tiny button battery. Carefully try to open your fob with pry tools. Remove 1xCR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's body. Battery must be placed with the same polarity as was an old. Your key will not work if you mistakenly put battery wrong way.
When the new battery installed, verify remote key fob by pressing buttons. If everything is functioning, assemble your fob’s body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and assemble it in place by hands from top to bottom. Check your key fob shell for gaps. If it is not firmly closed try to repeat last step.
Video of keyless entry remote disassembly
How To Replace Ford Excursion Key Fob Battery 2000 2005
Still not working? Buy new one