2000 Plymouth Voyager-1 Key Fob Battery Replacement Instructions

2000 Plymouth Voyager-1 Key Fob Battery Replacement Instructions

Key fob grant easy access to your auto. Once the remote key fob battery is weak you not to be able close doors remotely. Below, we described how to open your car remote key fob and replace your Plymouth key battery step by step.

What size battery does 2000 Plymouth Voyager-1 keyless entry remote take

Changing batteries in remote key fob require flat head screwdriver and 2xCR2016 batteries. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
  • flat head screwdriver
  • 2xCR2016 batteries

Simple steps to replace the battery in your Voyager-1's remote key fob

A small coin battery installed in the your remote key fob. Delicately try to pry apart your key fob with flat head screwdriver. Remove CR2016 batteries with flat head screwdriver.

Replace old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.

After the new batteries installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.

The last thing to do is put your cover back on fob. Carefully try to put the pieces together by hands from top to bottom. Check your remote key fob case for gaps. If it is not tightly closed try to repeat last step.

How to change the battery video instruction

How To Replace Plymouth Voyager Key Fob Battery 1999 2000

Still not working? Buy new one

FAQ

Remote key fob of Plymouth Voyager-1 use 2xCR2016 batteries. Most CR2016 batteries are under $4 depending on the type, size packaging and brand you buy. You can take old battery to the store, to be sure.

Keyless entry remote in most of cases do not need to be reprogrammed after battery change. If your keyless entry remote not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Changing your keyless entry remote battery is simple to do in 2000 Plymouth Voyager-1. Most of car manufacturers think of the customers and make a special hole for keyless entry remote disassembly.

The cost to replace the battery inside key is in range $50-600 depending on the brand and the service station.

Keyless entry remote batteries in Plymouth Voyager-1 should be changed every 3-4 years, but this will differ based on their amount of use and build quality. If your remote key fob decreased signal strength, you should replace batteries before it stop open doors and make problems for you.

If your auto has low key battery indicator on dashboard, signal strength reduced, fob's battery more than 4 years old or need multiple clicks to unlock or lock doors, it's probably battery change inside keyless entry remote needed. Installed battery is weak or dead with a high probability, but if it's not help to fix issues, fob change or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: GQ43VT13T
  2. Models: 1999-2002 Plymouth Voyager