2000 Saturn SL2 Key Fob Battery Replacement Instructions

Remote key fob grant easy access to your Saturn. Once the keyless entry remote battery is discharged you not to be able close trunk or doors remotely. In this article, we walks you through how to open your keyless entry remote and replace your Saturn key battery.
What size battery does 2000 Saturn SL2 remote key fob take
Before you start to disassembly keyless entry remote check all that you need: flat head screwdriver and CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Simple steps to replace the battery in your car's key fob
Inside of your keyless entry remote installed small coin cell battery. Gently try to open your remote key fob with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and assemble it together by hands from top to bottom. If your remote key fob body firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
How To Replace Saturn SL2 Sedan Key Fob Battery 2000 2002