How to Replace the Battery in a 2000 Toyota Camry Key Fob
If your Camry key is not unlock doors correct, the cell battery more likely needs to be replaced. Below, we are going to tell you how to disassembly Toyota key fob and change a weak battery yourself. If you choose to do it at home near Camry, follow our instruction, but don't forget to check everything you need.
What kind of battery keyless entry remote require
Don't forget before disassembly remote key fob be sure that you have all required tools and materials: phillips head screwdriver, flat head screwdriver and one CR2025 battery.- 1xCR2025 battery
- phillips head screwdriver
- flat head screwdriver
Simple steps to change the battery in your Camry's keyless entry remote
A small button battery installed inside the your key fob. Remove fasteners on the back of the key fob. Spin the keyless entry remote over and look for at least one screw holding in the plastic.
Gently try to disassemble your fob with pry tools. Replace CR2025 battery with flat head screwdriver.
Get new battery and install it in fob’s case. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything working properly, assemble your fob’s body in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and put it together by hands from top to bottom. Check your remote key fob shell for gaps. If it is not tightly closed try to repeat last step. Screw the back of the key fob.
How to replace the battery video instruction
How To Replace A 2000 - 2006 Toyota Camry Key Fob Battery FCCID: GQ43VT14T
Still not working? Buy new one