How to Replace the Battery in a 2000 Toyota Paseo Key Fob
If your car key fob is not unlock doors properly, the cell battery surely must to be changed. It's not difficult to replace the battery in your key fob by yourself. Everything you need is explained in this article.
What type battery remote key fob use
Before beginning open keyless entry remote make sure that you have all required tools and materials: phillips head screwdriver, flat head screwdriver and 1xCR2025 battery.- phillips head screwdriver
- flat head screwdriver
- 1xCR2025 battery
Step by step guide
Inside of your key fob installed small coin cell battery. Remove fasteners on the back of the keyless entry remote. Flip the remote key fob over and look for at least 1 screw holding in the plastic.
Delicately try to pry apart your fob with flat head screwdriver. Remove 1xCR2025 battery with flat head screwdriver.
Now it's time to install new battery in fob’s case. Battery must be placed with the same position as was a previous. Your key fob will not work if you mistakenly place battery wrong way.
Before assembling fob’s case, verify that all functions works by testing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it in place by hands from top to bottom. Inspect your keyless entry remote case for gaps. If it is not tightly closed try to repeat last step. Screw the back of the remote key fob.
Key Fob Battery Replacement 2000 Toyota Paseo Video
1990-2001 Toyota Key Fob Battery Replacement - EASY DIY
Still not working? Buy new one