How to Replace the Battery in a 2001 Chrysler LHS Key Fob
If your Chrysler key is no longer unlock doors correct, the cell battery probably must to be replaced. It's not difficult to change the battery in your key fob with our guide. All tools, that you need is described in this article.
What is the battery keyless entry remote require
Changing batteries in keyless entry remote require 2 CR2016 batteries and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.- flat head screwdriver
- 2xCR2016 batteries
Simple steps to change the battery in your car's key fob
A small coin cell battery installed inside the your key fob. Accurately try to open your fob with hands or flat head screwdriver. Change 2 CR2016 batteries with flat head screwdriver.
Now it's time to install new batteries inside keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that all functions works by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to put the two halves together by hands from top to bottom. If your key body tightly closed, we done. If not, repeat the last step.
How to replace the battery video guide
Chrysler LHS Key Fob Battery Replacement (1998 - 2001)
Still not working? Buy new one