2001 Honda Accord Key Fob Battery Replacement Guide
If your car keyless entry remote isn't unlock doors properly, the cell battery probably must to be changed. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All you need is explained in this article.
What kind of battery remote key fob require
Before starting disassembly remote key fob check all that you need: phillips head screwdriver, 1 CR2025 battery and flat head screwdriver.- 1xCR2025 battery
- flat head screwdriver
- phillips head screwdriver
Step by step instruction
Inside of your keyless entry remote installed small coin battery. Remove screw on the back of the remote key fob. Spin the key fob over and look for at least 1 screw holding in the plastic.
Carefully try to disassemble your remote key fob with hands or flat head screwdriver. Change CR2025 battery with flat head screwdriver.
Get new battery and install it inside fob’s shell. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you by mistake put battery wrong way.
When the new battery installed, verify keyless entry remote functionality by pressing buttons. If all functions works, assemble your keyless entry fob's shell in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and put it together by hands from top to bottom. Inspect your key fob case for gaps. If it is not tightly closed try to repeat last step. Screw the back of the remote key fob.
How to change the battery video instruction
How to Replace A 1998 -2002 Honda Accord Key Fob Battery FCC ID KOBUTAH2T
Still not working? Buy new one