2001 Honda Insight Key Fob Battery Replacement Guide
If your Honda key fob isn't working correct, the battery surely needs to be changed. In this case, you’ll benefit from knowing how to disassembly Honda key fob and replace a weak battery DIY. If you decide to do it at home near Insight, follow our guide, but don't forget to check all you need before you start.
What is the battery key fob requireChanging battery in key fob require phillips head screwdriver, flat head screwdriver and 1 CR2025 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
- phillips head screwdriver
- 1xCR2025 battery
- flat head screwdriver
Simple steps to replace the battery in your Insight's remote key fob
Inside of your key fob installed small button cell battery. Remove fasteners on the back of the keyless entry remote. Flip the remote key fob over and look for at least one screw holding in the plastic.
Carefully try to disassemble your key fob with pry tools. Change 1 CR2025 battery with flat head screwdriver.
Change old battery with new one CR2025. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all functions works by testing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it together by hands from top to bottom. If your key fob body firmly closed, we done. If not, repeat the last step. Screw the back of the remote key fob.
How to change the battery video instruction
How To Replace Honda Insight Key Fob Battery 2000 2001 2002 2003 2004 2005 2006
Still not working? Buy new one