2001 Isuzu Amigo Key Fob Battery Replacement Instructions
If your auto key fob is not working properly, the battery more likely must to be changed. It's not difficult to replace the battery in your remote key fob DIY. All tools, that you need is explained below.
What type battery does 2001 Isuzu Amigo key fob requiredDon't forget before disassembly key fob be sure that you have all required tools and materials: flat head screwdriver, phillips head screwdriver and CR2016 batteries.
- 2xCR2016 batteries
- phillips head screwdriver
- flat head screwdriver
Step by step instruction
A button battery installed in the your remote key fob. Unscrew the back of the keyless entry remote. Flip the remote key fob over and look for at least 1 fastener holding in the plastic.
Gently try to open your key with pry tools. Change two CR2016 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new batteries installed, verify key fob functionality by pressing buttons. If all functions works, assemble your fob’s case in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and put it in place by hands from top to bottom. Check your keyless entry remote body for gaps. If it is not tightly closed try to repeat last step. Screw fastener in the back of the key fob.
Key Fob Battery Replacement 2001 Isuzu Amigo Video
How To Replace Isuzu Amigo Key Fob Battery 1998 1999 2000 2001 2002
Still not working? Buy new one