How to Replace the Battery in a 2001 Isuzu VehiCross Key Fob
Remote key fob allow access to your VehiCross. When the keyless entry remote battery is dead or weak you not to be able unlock doors remotely. In this post, we walks you through how to open your car remote key fob and replace your Isuzu key battery step by step.
What type battery does 2001 Isuzu VehiCross keyless entry remote takeBefore you start to open keyless entry remote be sure that you have all required tools and materials: 1xCR2025 battery, phillips head screwdriver and flat head screwdriver.
- phillips head screwdriver
- 1xCR2025 battery
- flat head screwdriver
Simple steps to replace the battery in your VehiCross's key fob
Inside of your remote key fob installed button cell battery. Remove fasteners on the back of the keyless entry remote. Flip the remote key fob over and look for at least one fastener holding in the plastic.
Gently try to open your key with flat head screwdriver. Change 1xCR2025 battery with flat head screwdriver.
Get new battery and install it in fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, verify key fob by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
The last thing to do is put your cover back on fob. Accurately try to assemble the two halves together by hands from top to bottom. If your fob case firmly closed, we done. If not, repeat the last step. Screw the back of the key fob.
Video of key fob disassembly
How To Replace Isuzu Vehicross Key Fob Battery 1999 2000 2001
Still not working? Buy new one