2001 Mazda B2300 Key Fob Battery Replacement Instructions
If your Mazda remote key fob is no longer working well, the cell battery likely must to be replaced. In this case, we are going to tell you how to disassembly your car keyless entry remote and change a dead or weak battery DIY. If you gonna solve to do it at home near B2300, use this guide, but first make sure you have everything you need before you start.
What type battery does 2001 Mazda B2300 remote key fob requiredBefore starting disassembly remote key fob be sure that you have all recommended tools and materials: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's keyless entry remote
A small coin battery installed in the your key fob. Delicately try to pry apart your remote key fob with hands or flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, make sure that all functions works by testing buttons on keyless entry remote.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and assemble it together by hands from top to bottom. If your keyless entry remote shell firmly closed, we done. If not, repeat the last step.
Video of keyless entry remote opening
How To Replace Mazda B2300 Key Fob Battery 2001 2009