How to Replace the Battery in a 2001 Mercury Sable Key Fob
Remote key fob allow access to your Sable. When the remote key fob battery is weak or dead you will lose your fob’s ability to control distance functions. Yes, it is possible to change the battery in your keyless entry remote, and it’s easier than you think. Everything you need is explained in this article.
What is the battery remote key fob requireChanging battery in keyless entry remote require CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Step by step instruction
A small coin battery installed in the your remote key fob. Gently try to open your fob with pry tools. Change 1 CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all working properly by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Delicately try to put the pieces in place by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2001 Mercury Sable Video
How To Replace Mercury Sable Key Fob Battery 1998 1999 2000 2001 2002 2003 2004 2005