How to Replace the Battery in a 2002 Buick Century Key Fob
If your Century keyless entry remote isn't open doors perfectly, the cell battery probably must to be changed. In this article, you’ll benefit from knowing how to disassembly your remote key fob and change a discharged battery yourself. If you choose to do it at home near Century, use this instruction, but first make sure you have tools and materials required before you start.
What is the battery key fob requireBefore going to open key fob be sure that you have all recommended tools and materials: flat head screwdriver and one CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Century's keyless entry remote
Inside of your key fob installed button battery. Accurately try to open your key with flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check key fob by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your remote key fob shell firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
How To Replace A Buick Century Key Fob Battery 2001 - 2005
Still not working? Buy new one